Precision Punch
Industrial & Engineering Plastics
Plastics Supplier


Polyurethane
(Adiprene®, Airthane®, Versathane®, Andur®, Isoplast® 301, 302)

  • Special Grades:
    Polyester higher physical properties and cut and tear.
    Polyethers better water, dynamic and higher temperature properties.
    Isoplast® 301, 302 - rigid thermoplastic polyurethane.
    FDA grades, high temperature, flame resistant grades, ESD and conductive grades.

  • Key Features:
    Good mechanical and dynamic properties, good cut, tear and abrasion resistance, good impact strength, low compression set, superior load bearing capacity, wide range of physical properties, bowling ball hard to jelly soft.

  • Fabricating:
    Harder durometers machine and cut easily, waterjet, diecutting.

  • Applications:
    Strippers, gaskets, bumpers, springs, rollers, metal forming dies, wheels, seals, belts, chute liners, wiper blades, gears, bearings.

  • Polyurethane Sheet Sizes:
    12" x 12"
    24" x 48"
    48" x 48"
    48" x 96"

  • Polyurethane Sheet Thickness Available:
    .020" - 8.00" thick

  • Polyurethane Sheet Thickness Tolerances:
    .020" - 3/16" +/-.010"
    1/4" - 3/8" +/-.015
    3/8" - 4" +/-5%

  • Polyurethane Rod Diameters:
    1/4" - 16" sufficient to finish

  • Polyurethane Rod Lengths:
    4 ft.

  • Standard Colors:
    Natural (translucent amber) colored code durometers Red95A, Green 80A, amber 60A.

    • click to download Click to download document         printer friendly version Click for printer friendly version

    Adiprene® is a registered trademark of Chemtura Corporation.
    Airthane®, Versathane® are registered trademarks of Air Products.
    Isoplast® is a registered trademark of Dow.
    Andur® is a registered trademark of Anderson Development Company.